Filter Results By:
+
Search Within Filters
Category
Finish
Style
Option
Voltage
Glass Finish or Style
Glass Form
Number of Blades
Location Rating
Mount Type
Wattage
Smart Home
Brand
Specials & Availability
Height
to
Width
to
Length
to
Price
to Powered By
Item Description
NEXUS simplifies LED array lighting systems by combining an in-wall LED dimmer switch and power supply into a single integrated unit. NEXUS mounts in a standard in-wall switch box, accepts 120VAC and converts to 24V.
FEATURES
• First LED Driver + In-Wall Dimmer Switch in one unit.
• Simplifies LED installation by eliminating compatibility issues between driver and dimmer.
• Fits in a standard recessed electrical box.
• 100% – 5% smooth dimming.
• No minimum load.
• Single Pole preset dimmer with on/off push switch.
• Adjustable voltage output dial to address voltage drop.
• Includes voltage barrier partition to install high and low voltage circuit in same switch box.
• No derating required when ganging units.
• Power failure memory: If power is interrupted, NEXUS® will return to setting prior to interruption.
• cULus Listed (US & Canada) Low Voltage Lighting System #E472619.
Face Plate: White face included.
Note: Decora switch plate not included
Item Description
Used to mount Tape Light to various surfaces. Tape Light snaps into the channel.
Compatible: Standard Tape Light, Side-Lit Tape Light and Comfort Dim Tape Light
Material: Plastic
Adjustable: Field Cuttable
Finish: White
Protection: UV Protected
Dimensions:
Outside Width: 9/16"
Inside Width: 7/16"
Length: 48"
Height: 5/16"
Item Description
The 12" power line interconnector cable allows for easy connection to any driver. NAHO-609 is included and connected to each High Output & Hy-Brite Tape Light roll. Power Line interconnector cables are used for separated tape light rolls or sections to be installed in different locations. Use interconnection cables to extend length.
Compatible: High Output Tape Light & Hy-Brite Tape Light
Finish: White
Item Description
48" Hardwire power cord for supplying power to Hy-Brite tape (NUTP51) or High Output tape (NUTP81). Can also be used to join several runs of tape to a single power source, to create a “Y” or “X”.
Item Description
96" Hardwire power cord for supplying power to Hy-Brite tape (NUTP51) or High Output tape (NUTP81). Can also be used to join several runs of tape to a single power source, to create a “Y” or “X”.
Item Description
3" Apollo flanged pinholes feature a 1.67" x 1.67" opening with exceptional glare control for a quiet ceiling appearance.
Finish: White
Compatible Housings:
NHAP-3S: 3" Apollo Square Non-IC Housing with Field Changeable Optics
NHAPIC-3S: 3" Apollo Square IC Housing with Field Changeable Optics
NHAPNIC-3S: 3" Apollo Square IC Housing with Fixed Spot Optics
Item Description
Apollo Non-IC new construction housing require a minimum clearance of 3" from thermal insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Adjustable LED mechanism allows for 361° horizontal rotation and 45° vertical aiming. Optimized TIR optics directs the light through the center of the aperture for maximum efficiency and low aperture brightness.
Input Voltage: 120/277V
Lumens / Wattage: 2500lm / 26W
Color Temperature: 3500K
Color Rendering Index: 90+ CRI
Beam Spread: 55° Flood
Dimming: Triac, ELV or 0-10V
Ceiling Thickness: 0.5" to 0.875"
Compatible Trims: NAPF-3SDN, NAPF-3SPH, NAPF-3SWW, NAPT-3SDN, NAPT-3SPH, NAPT-3SWW
Listing: cULus Listed for Damp Locations (Wet locations when used with lensed trim)
Item Description
The 9" power cord allows for easy connection to any plug-in driver. NATL-509 is included and connected to each Tape Light roll. Power cords are used for separated tape light rolls to be installed in different locations. Use linking cables to extend length.
Compatible: Side-Lit Tape Light
Item Description
Apollo Non-IC new construction housing require a minimum clearance of 3" from thermal insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Adjustable LED mechanism allows for 361° horizontal rotation and 45° vertical aiming. Optimized TIR optics directs the light through the center of the aperture for maximum efficiency and low aperture brightness.
Input Voltage: 120/277V
Lumens / Wattage: 2500lm / 26W
Color Temperature: 3000K
Color Rendering Index: 90+ CRI
Beam Spread: 26° Spot
Dimming: Triac, ELV or 0-10V
Ceiling Thickness: 0.5" to 0.875"
Compatible Trims: NAPF-3RDN, NAPF-3RPH, NAPF-3RWW, NAPT-3RDN, NAPT-3RPH, NAPT-3RWW
Listing: cULus Listed for Damp Locations (Wet locations when used with lensed trim)
Item Description
4' Shallow Channel to mount low voltage tape light on a surface.
Field cuttable
Aluminum extrusion
Surface mount installation
Included: Diffused lens and end caps
Length: 4' (field cuttable)
Finish: Aluminum
Compatible Tape Lights:
NUTP5: 24V Hy-Brite LED Tape Light
NUTP8: 24V High Output LED Tape Light
NUTP9: 24V Side-Lit LED Tape Light
NUTP10: 24V CCT Color Tuning LED Tape Light
NUTP12: 24V Comfort Dim LED Tape Light
NUTP14: 24V COB High Output LED Tape Light
NUTP15: 24V COB Standard LED Tape Light
NUTPCOB-RGBW: 24V RGBW COB LED Tape Light
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site