Filter Results By:
+
Search Within Filters
Category
Finish
Style
Option
Voltage
Glass Finish or Style
Glass Form
Number of Blades
Location Rating
Mount Type
Wattage
Smart Home
Brand
Specials & Availability
Height
to
Width
to
Length
to
Price
to Powered By
Item Description
6" Dedicated new construction housing can be used in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. The housing is dedicated and labeled for use with Cobalt High Lumen Downlights.
Input Voltage: 120/277V
Wattage: 22W
Dimming: Phase (Triac or ELV) or 0-10V
Compatible Trims: NLCB2-651, NLCB2-652, NLCB2-653, NLCB2-656
Listing: cULus Listed for Damp Locations (Wet locations when used with compatible trim)
Item Description
Live end feed powers the track system from the end of a run. End knockout accepts 1/2" trade size conduit fitting.
Compatible Track System: One-Circuit
Polarity: Right Polarity
Input Voltage: 120V
Maximum Wattage: 2400W
Dimming: Triac or ELV
Finish: Black
Item Description
2" Iolite LED downlights require a dedicated Iolite new construction or remodel housing. Deep regressed cone reflectors optimize visual cut-off.
Lumens / Wattage: 800lm / 14W
Color Temperature: Comfort Dim (3100K-2000K)
Color Rendering Index: 90 CRI
Beam Spread: Three field changeable optics included
Finish: Matte Powder White Reflector / Matte Powder White Flange
Listing: cULus listed for wet locations
Accessories: NIO-AS, NIO-HC, NIO-FMMR-2R
Item ID: MLNM8
Width:
Height:
Finish: Matte Powder White Reflector / Matte Powder White Flange
Item Description
A pendant adapter allows fixtures up to 5 lbs. to be suspended and powered from the track system.
Maximum Weight: 5 lbs.
Finish: Black
Track Adapter: H-Style
Item Description
6" AC Opal LED surface mount fixtures are designed to install over a standard junction box or retrofit over 5" or 6" recessed housings. The low profile dimmable luminaire produces even illumination in dedicated CCT options.
Input Voltage: 120VAC
Lumens / Wattage: 1050lm / 16W
Color Temperature: 4000K
Color Rendering Index: 90 CRI
Dimming: Triac or ELV
Finish: Bronze
Listing: cULus Listed for Wet Locations
Item Description
Enclosed dimmable LED Driver for 12V LED systems.
Compatibility: 12V LED Puck Light (NMP) or 12V M1 Downlight (NM1)
Input Voltage: 120VAC
Output Voltage: 12VDC
Wattage: 60W
Dimming: Triac or ELV
Included: 10' Power Line Connector Cable
Listing: cULus Listed
Item Description
New construction flat frame converts 2" Iolite remodel housings. Allows access to driver from below the ceiling.
Compatible Housing: NHRIOIC-28
Item Description
L-Connector is used to connect two pieces of track together in a right angle and carry the electricity. Can be used as a power feed with one knockout. Can be adjusted to accommodate left and right polarity. Includes “I” Connector cover to convert into a Straight Connector.
Compatible Track System: One-Circuit
Polarity: Left or Right Polarity (Can be converted)
Input Voltage: 120V
Maximum Wattage: 2400W
Dimming: Triac or ELV
Finish: White
Item Description
Luminaire provides 90 minutes of light from two adjustable heads for illuminating paths of egress upon failure of normal power. Emergency unit is available in higher lumen output and remote capability
Input Voltage: 120/277VAC
Lumens / Wattage Per Head: (2) 150lm / 1W
CCT: 5700K
Finish: White
Batteries: NiMH 3.6V 2W maintenance-free
Remote Option: Luminaire is capable of including an additional 3.6V / 4W battery. Additional battery is used to power an additional remote emergency light. Upon power failure, each additional battery requires an additional 24 hours to recharge
Listing: cULus Listed for Damp Locations, NFPA 70, NFPA 101, UL 924
Item Description
16" ELO LED Surface mount luminaires are only 1" thick for a minimalist appearance. Luminaires can be surface mounted over a junction box or suspended with pendant kit.
Input Voltage: 120-277V
Lumens / Wattage: 1922lm / 20W
Color Temperature: 3000K
Color Rendering Index: 90+ CRI
Finish: White
Dimming: Triac or ELV
Item Description
12' Track Kit includes (2) 6' foot track sections and Straight Connector to create a 12' track. This kit is shipped in a smaller box and eliminates freight shipping fees. The low profile, extruded aluminum track with 20-Amp rated flat, solid integral conductors. Aluminum construction with 0.045 PVC insulators holding 12-gauge flat conductor wiring. Each track section includes a groove on the surface of the extrusion. This groove must be continous throughout the track run. Track heads also have a polarity groove, which must coincide with the track’s polarity groove. The track may be surface, stem, or cable mounted. All lengths of track can be field cut. Surface mounting
hardware included with each track section.
Number of Circuits: One
Length: 144.625in
Finish: White
Input Voltage: 120V
Maximum Wattage: 2400W
Dimming: Triac or ELV
Included: (2) 6' Tracks, (1) Straight Connector, (2) Dead End Caps, and Mounting Hardware
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site